Natural grey and charcoal blends
A neutral, understated finish that suits most brick and render homes without competing with the rest of the property.
Exposed Aggregate Concrete
Exposed Aggregate Concrete for South East Melbourne Homes
Exposed aggregate concrete gives a driveway, patio or path a textured, natural stone finish without giving up any of the strength of a standard concrete slab, and it's a service we deliver right across South East Melbourne, from Dandenong and Springvale through to Cranbourne, Keysborough and Hampton Park. The stone sits just under the surface, then gets washed back once the pour has set, so the finish is part of the slab itself rather than something sitting on top of it.
It's a popular choice for homeowners who want a driveway or outdoor area that looks considered rather than just poured and left plain, and for builders who need a finish that holds up under regular use. If that sounds like what you're after, get in touch and we'll walk you through the options for your property.
Request Your Free Quote
Fast, no-obligation quotes across South East Melbourne.
Where Exposed Aggregate Concrete Gets Used
- New driveways and crossovers.A new driveway is the most common place exposed aggregate gets specified, since it copes with vehicle weight and daily traffic while giving the property a finished, deliberate look.
- Pool surrounds and outdoor entertaining areas.The textured surface stays grippy underfoot even when wet, which makes it a practical choice around pools, alfresco areas and anywhere bare feet are common.
- Replacing cracked or plain concrete.Where an old slab has cracked, faded or just never looked right, exposed aggregate is often used to replace it with something stronger and better finished the second time around.
A Finish That Still Looks Sharp Years Later
Once it's down, exposed aggregate concrete is genuinely low maintenance. The stone finish resists staining, doesn't fade the way a plain coloured slab can, and the texture means everyday wear is far less noticeable than on a smooth surface. Properly reinforced and jointed, it also resists the cracking that ages a lot of driveways and patios well before their time. Day to day, it just gets walked on, driven over and hosed off, without the upkeep some decorative surfaces demand.
Getting the Finish Right the First Time
Exposed aggregate is less forgiving than a plain broom finish, since the stone, the wash-off timing and the curing all affect how the final surface looks and how well it lasts. We manage that process closely rather than treating it like a standard pour, from the mix through to when the surface gets washed back and sealed. Control joints get placed properly to manage movement, not added as an afterthought, and we stay in contact throughout so you know what's happening and when. That attention to timing and detail is what separates a finish that looks sharp for years from one that discolours or wears unevenly early.
FAQ
Common Questions About Exposed Aggregate Concrete
Plain and broom finishes are smooth or lightly textured concrete with no stone showing. Exposed aggregate has the top layer washed back after the pour so the stone sits visible at the surface, giving it more texture, more grip and a different look while using the same underlying slab.
Cracking usually comes down to reinforcement, control joints and how the concrete was mixed and cured, not the finish itself. We reinforce and joint every exposed aggregate slab properly and manage the cure, which is what actually prevents the cracking a lot of older driveways and patios suffer from.
Yes. We're happy to show you completed exposed aggregate work so you can see the stone and finish options in person before deciding what's right for your property.
We back the work we do. Ask us about the specifics for your job when you get in touch, since the details can depend on the scope of the project.